| Air Magic | AMF15 | "F-15 Kit, Started, Complete with LG and Accessories" | $2,895.00 |
| |
| Cent.Jet | Call | We can furnish any of the Century Jet landing gear sets - Call | CALL |
| |
| Cent.Jet | Pilots | All Pilots Busts or Full body are available: WWII & Jet | CALL |
| |
| Dare | 202FS | "Sopwith Camel Kit: 42"" Span, Free Flight or Micro" | $108.50 |
| |
| Dare | 403RC | Morane Sauinier Typl L | $90.50 |
| |
| Dare | 501EL | "Curtis JN-4D Jenny Kit: 43"" span, R/C Glow or Electric" | $59.50 |
| |
| Dare | 509-EL | "Cessna Skyhawk Kit: 50.0"" Span R/C Glow or Electric" | $59.75 |
| |
| Dare | 516EL | "S.E.5a Potensky POT-2 Kit: Span 23"", R/C Electric" | $34.50 |
| |
| Dare | 518-EL | "Spirit of St. Louis Kit: Span 45.5"" R/C Electric" | $59.95 |
| |
| Dare | 519EL | "Sikorsky S-16, Span 36.5"" R/C Electric" | $55.50 |
| |
| Dare | 525-EL | "Luscombe Silvaire Kit: Span 52.5"" R/C Electric" | $62.50 |
| |
| Dare | 529-EL | "Stinson 108-3 Voyager Kit: Span 48"" R/C Glow or Electric" | $78.75 |
| |
| Dare | 535EL | Piper J-3 Cub Kit: Electric | $82.50 |
| |
| Dare | 536EL | "P51 ""Tuskegee Airmen"" 32.37"" Wing Span R/C Glow" | $52.50 |
| |
| Dare | EPP-1 | "Power Pack:Motor, Speed Control, Battery, Prop" | $95.50 |
| |
| Dare | EPP-10 | "Power Pack: Motor, Battery, Speed Control, Prop" | $89.95 |
| |
| Dare | EPP-11 | "Power Pack: Motor, Battery, Speed Control, Prop" | $88.75 |
| |
| Dare | EPP-14 | "Power Pack: Motor, Speed Control, Battery, Prop" | $82.75 |
| |
| Dare | EPP-2 | "Power Pack for Wright Flyer: Motor, Bat. S.C. , Props" | $95.50 |
| |
| Dare | EPP-3 | "Power Pack: Motor, Battery, Speed Control, Prop" | $79.75 |
| |
| Dare | EPP-4 | "Power Pack: Motor, Battery, Speed Control, Prop" | $82.75 |
| |
| Dare | EPP-5 | "Power Pack: Motor, Battery, Speed Control, Prop" | $74.95 |
| |
| Dare | EPP-6 | "Power Pack: Motor, Battery, Speed Control, Prop" | $80.75 |
| |
| Dare | EPP-7 | "Power Pack: Motor, Battery, Speed Control, Prop" | $78.50 |
| |
| Dare | EPP-8 | "Power Pack: Motor, Battery, Speed Control, Prop" | $73.25 |
| |
| Dare | EPP-9 | "Power Pack: Motor, Battery, Speed Control, Prop" | $135.50 |
| |
| Hacker | Hacker | We can furnish the full line of 'Hacker' products | CALL |
| |
| Hitec | ALL | Don't see what you need in Hitec - just call | CALL | 9/14/2006
| |
| Jersy Modeler | 1.25GHP-R | 1.25 Gal. Glow Fuel Tank w/Manual Pump and Fittings | $47.25 | 9/14/2006
| |
| Jersy Modeler | 2.5RHP-R | 2.5 Gal. Gas Fuel Tank w/Manual Pump and Fittings | $49.25 | 9/14/2006
| |
| Jersy Modeler | ALL | We can furnish any of the Jersy Modeler Fueling Tanks - CALL | CALL | 9/14/2006
| |
| Jomar | 2GD | "Twin Engine Glow Drive, Less battery" | $49.95 |
| |
| Jomar | GD | "Single Engine Glow Drive, less battery" | $39.95 |
| |
| Jomar | GDS | "Gear Door Sequencer, adjustable speed" | $39.95 |
| |
| Jomar | Other | "All Jomar products available, call us if you don't see it on our list" | CALL |
| |
| Jomar | SGS | "Adjustable Servo Controler, can adjust speed of indivual servo" | $34.75 |
| |
| Jomar | SR-2 | "Servo Reverser, single leads in & out, for 4-5 cell battery" | $17.95 |
| |
| Jomar | SR-2Y | Server Reverser w/Y harness | $17.95 |
| |
| Jomar | SRE-2 | Servo reverser and/or expoential control | $22.95 |
| |
| Jomar | TES | "Twin Engine Syncronizer System, less battery" | $82.50 |
| |
| Kangke | KA019 | "ARF ""Texas Hurricane"" 28% Scale, w/s 78"", Lngth 70""" | $414.00 | 11/3/2005
| |
| Kangke | KA020 | ARF CAP 232 Red/White/Blue Finish | $295.00 | 11/3/2005
| |
| Kangke | KA037 | "ARF ""GeeBee 50"" (funfly 3D) w/s 41.5""" | $129.00 | 11/3/2005
| |
| Kangke | KE021 | .61a R/C Engine w/Muffler | $79.50 | 11/3/2005
| |
| KMP | KMBonV | "ARF Bonanza V-35 All Composit w/LG, 65"" ws" | $885.00 | 11/3/2005
| |
| KMP | KMBon | "ARF Bonanza A-36 All Composit w/LG, 65""ws" | $895.00 | 3/12/2007
| |
| KMP | KMF7F | "ARF F7F Tigercat, All Composit Const., 88""WS, W/Retracts" | $955.00 | 3/12/2007
| |
| KMP | KMHH | "ARF Hawker Typhoon 73.5"" wing Span, Engine req. 1.20-1.40 4-cyc" | $655.00 | 3/12/2007
| |
| KMP | KMHSEA | "ARF ""Sea Fury"", F.G. Fuse, w/s 71"" w/Retracts, 1.20 Engine" | $485.00 | 11/3/2005
| |
| KMP | KMJU87 | "ARF German Stuka Ju-87, wing span 78.5"", Engine req. 1.20 or =" | $569.95 | 3/12/2007
| |
| KMP | KMPFlycat | "Flycat: 47.2 w.s., .46-.61 2-cy., 5ch.-8 servos" | $169.95 | 6/5/2007
| |
| KMP | KMST | "Shorts Tucano, w/s 65""" | $310.00 | 11/3/2005
| |
| KMP/EAM | EAMVEL | "ARF ""Velocity XL, 1:4.6 Scale, w/s 80"", F.G. Fuse " | $475.00 | 11/3/2005
| |
| KMP/EAM | EAMVEL-EK | "Velocity XL Engine Kit: O.S. 91, 3-Blade Prop., Spinner" | $373.50 | 11/3/2005
| |
| KMP-PP | KMPFA18 | "Park Pilot F/A 18 Jet 44"" w.s. and 68"" length, EPS Foam" | $179.50 | 7/27/2006
| |
| KMP-PP | KMP-PPAB | "Park Pilot Airbus A380 72"" w.s. EPS Foam" | $159.50 | 7/27/2006
| |
| MaxFord | GB-Y/B | "GeeBee Y - Electric ARF 40"" w.s. Inc.Motor and ESC: Color White/Red" | $210.00 |
| |
| MaxFord | GM-Bfly-Flts | """Butterfly"" Floats" | $35.75 |
| |
| MaxFord | MaxFord | We can furnish the full line of MaxFord Products | Call |
| |
| Maxx | Maxx | We can furnish the full line of Maxx Products | Call |
| |
| Maxx Prod. | 1570 | ECS Control Switch | $4.75 | 9/14/2006
| |
| Maxx Prod. | 3170 | Futaba Heavy Duty Charger Switch | $14.25 | 9/14/2006
| |
| Maxx Prod. | 3470 | Hitec/JR/Air Heavy Duty Charger Switch | $14.25 | 9/14/2006
| |
| Maxx Prod. | 5170 | Futaba Heavy Duty Charger Switch w/LED Indicator | $23.95 | 9/14/2006
| |
| Maxx Prod. | 5470 | hitec/JR/Air Heavy Duty Charger Switch w/LED Indicator | $23.95 | 9/14/2006
| |
| Maxx Prod. | All | We can furnish any Maxx items (www.maxxprod.com) - Give us a call | Call | 6/5/2007
| |
| Midwest | MW 5244 | "Ply 18""x12x24" | $12.25 | 11/3/2005
| |
| Midwest | MW4422 | Bass Wood 2x4x12 | $6.25 | 11/3/2005
| |
| Midwest | MW5241 | "Ply 1/32""x12x24" | $7.25 | 11/3/2005
| |
| Midwest | MW5242 | "Ply 1/16""x12x24" | $7.50 | 11/3/2005
| |
| Midwest | MW5243 | "Ply 3/32""x12x24" | $10.85 | 11/3/2005
| |
| Midwest | MW5530 | Lite-Ply 3mmx12x24 | $5.85 |
| |
| Midwest | MW5540 | Lite-Ply 6mmx12x24 | $6.58 |
| |
| Midwest | MW6066 | Balsa 1/4x1/4x36 | $0.72 |
| |
| Midwest | MW6069 | Balsa 1/4x1/2x36 | $1.25 |
| |
| Midwest | MW6402 | Balsa 1/16x4x36 | $2.35 |
| |
| Midwest | MW6403 | Balsa 3/32x4x36 | $2.74 |
| |
| Midwest | MW6404 | Balsa 1/8x4x36 | $2.95 |
| |
| Nelson Spec. | NEC100 | "C-Clamp 1/2"", ONE PAIR" | $2.49 |
| |
| Nelson Spec. | NE-C100 | "1/2"" C-Clamp" | $2.49 |
| |
| Nelson Spec. | NEC101 | "C-Clamp 1"", ONE PAIR" | $2.79
| | |
| Nelson Spec. | NE-C101 | "1"" C-Clamp" | $2.79
| | |
| Nelson Spec. | NEC102 | "C-Clamp 1"", Deep Jaw, ONE PAIR" | $3.69
| | |
| Nelson Spec. | NE-C102 | "1"" DP Jaw Clamp" | $3.69
| | |
| Nelson Spec. | NEC206 | "Sliding Bar Clamp 6""" | $3.95
| | |
| Nelson Spec. | NE-C206 | "6"" Sliding Bar Clamp" | $3.95
| | |
| Nelson Spec. | NEC212 | "Sliding Bar Clamp 12""" | $4.75
| | |
| Nelson Spec. | NE-C212 | "12"" Sliding Bar Clamp" | $4.75
| | |
| Nelson Spec. | NEC300 | "Small Toolmaker Parallel Clamps, ONE PAIR" | $3.25
| | |
| Nelson Spec. | NE-C300 | Small Toolmaker Parallel Clamp | $3.25
| | |
| Nelson Spec. | NEC301 | "Large Toolmaker Parallel Clamps, ONE PAIR" | $4.95
| | |
| Nelson Spec. | NE-C301 | Large Toolmaker Parallel Clamp | $4.95
| | |
| Nelson Spec. | NE-ESH1 | Intelligent Glow Driver - plane mounted glow plug connection | $42.95
| | |
| Nelson Spec. | NEL100 | "Submini Clevis Ends, 1/32 Hole, 2 per package" | $5.95
| | |
| Nelson Spec. | NE-L100 | Submini Adjustable Clevis Ends | $5.75
| | |
| Nelson Spec. | NEL200 | 90 Degree Bellcrank 1-1/4 Arms | $19.95
| | |
| Nelson Spec. | NE-L200 | 90 Deg. Bellcrank w/1 1/4 Arms | $19.95
| | |
| Nelson Spec. | NEL250AF | "2 1/2"" Double Servo Arm, AT/FUT/HIT" | $11.95
| | |
| Nelson Spec. | NE-L250AF | "2 1/2"" Double Servo Arm; AT Fut" | $11.95
| | |
| Nelson Spec. | NEL300B | "3"" Streight Bellcrank for Servo " | $19.95
| | |
| Nelson Spec. | NEL301 | "2"" Double Servo Arm: Fits AT, Futaba or Hitec" | $9.95
| | |
| Nelson Spec. | NEL301 | "2"" Double Servo Arm: Fits AT/FUT/HIT" | $9.95
| | |
| Nelson Spec. | NE-L301 | "2"" Double Servo Arm; AT, Fut, Hitec" | $9.95
| | |
| Nelson Spec. | NEL302 | "3/4"" Single Servo Arm, FUT/AT/HIT" | $8.95
| | |
| Nelson Spec. | NE-L302 | "3/4"" Single Servo Arm; AT, Fut" | $8.95
| | |
| Nelson Spec. | NEL305 | "9/16"" Single Servo Arm, FUT/AT/HIT" | $8.95
| | |
| Nelson Spec. | NE-L305 | "9/16"" Single Servo Arm; AT, Fut, Hitec" | $8.95
| | |
| Nelson Spec. | NEL312 | "1 1/4"" Single Servo Arm, FUT/AT/HIT" | $8.95
| | |
| Nelson Spec. | NE-L312 | "1 1/4"" Single Servo Arm; AT, Fut, Hitec" | $8.95
| | |
| Nelson Spec. | NE-L319 | "1 1/2"" Double Servo Arm; Pull/Pull, AT, Futaba" | $9.75
| | |
| Nelson Spec. | NELFAB-ANY | Lite Fab & Color Fab 6' Rolls | $15.95
| | |
| Nelson Spec. | NELF-ANY | Lite Film: Iron-on Covering | $10.25
| | |
| Nelson Spec. | NELT500 | "90 Degree Servo Tray, Single Servo" | $7.80 |
| |
| Nelson Spec. | NET210 | 2 x 1 Three servos Aluminum | $9.95 |
| |
| Nelson Spec. | NE-T500 | "90 Deg. 1 Servo Tray Standard, Futaba" | $7.80 |
| |
| Nelson Spec. | NET511 | 3 x Three servos Aluminum | $9.95 |
| |
| Nelson Spec. | NE-T511 | 3 x 3 Servo Tray | $9.95 |
| |
| RCV | RCV120601 | "Muffler Assembly for RCV120SP, RCV90SP, and RCV58CD" | $21.75 |
| |
| RCV | RCV120801 | Carburettor For RCV120SP | CALL |
| |
| RCV | RCV120-SP | RCV 4-CYCLE R/C ENGINE 1.20 cu.in | CALL |
| |
| RCV | RCV130CD | """New"" RCV 1.20cu in 4-Cycle Engine" | CALL | 11/14/2007
| |
| RCV | RCV52220 | Prop washer and nuts: for RCV58CD | CALL |
| |
| RCV | RCV52601 | Muffler Assembly for RCV60SP | CALL |
| |
| RCV | RCV58-CD | RCV 4-Cycle R/C Engine | CALL |
| |
| RCV | RCV60801 | "Carburettor For RCV60SP, RCV90SP, and RCV58CD" | CALL |
| |
| RCV | RCV60873 | "Inlet Manifold for RCV60SP, RCV90SP, RCV58CD" | CALL |
| |
| RCV | RCV60-SP | RCV 4-CYCLE R/C ENGINE .60 cu in | CALL | R032007
| |
| RCV | RCV80228 | Prop washer and nuts: for RCV60SP | CALL |
| |
| RCV | RCV80228-120 | Prop washer and nuts: for RCV90SP and RCV120SP | CALL |
| |
| RCV | RCV90-SP | RCV 4-CYCLE R/C ENGINE .90 cu in | CALL | R03/12/07
| |
| RCV | RCV91-CD | RCV 4-Cycle Engine | CALL | R03/12/07
| |
| RCV | RCVBP | "RCV Extra Engine Backer Plates, for 60/90/1.20's" | CALL |
| |
| RCV | RCVSA1 | RCV STARTING ADAPTOR | CALL |
| |
| Robart | 13840A1 | "4"" Diameter 8 Spoke Aluminum Hub" | CALL |
| |
| Robart | 13840A2 | "4"" Diameter 10 Spoke Aluminum Hub" | CALL |
| |
| Robart | 13845A1 | "4.5"" Diameter 8 Spoke Aluminum Hub" | CALL |
| |
| Robart | 13845A2 | "4.5"" Diameter 10 Spoke Aluminum Hub" | CALL |
| |
| Robart | 13850A1 | "5"" Diameter 8 Spoke Aluminum Hub" | CALL |
| |
| Robart | 13850A2 | "5"" Diameter 10 Spoke Aluminum Hub" | CALL |
| |
| Robart | 13852A1 | 5.25 Diameter 8 Spoke Aluminum | CALL |
| |
| Robart | 13852A2 | 5.25 Diameter 10 Spoke Aluminum | CALL |
| |
| Robart | 13855A1 | "5.5"" Diameter 8 Spoke Aluminum" | CALL |
| |
| Robart | 13855A2 | "5.5"" Diameter 10 Spoke Aluminum" | CALL |
| |
| Robart | 13860A1 | "6"" Diameter 8 Spoke Aluminum" | CALL |
| |
| Robart | 13860A2 | "6"" Diameter 10 Spoke Aluminum" | CALL | | |
| Robart | RBT 165S | "3/8"" Air Cylinders - Activate Accessories or Doors" | $20.25 | | |
| Robart | RBT129 | "2"" Scale X Tread Wheels" | $10.75 | | |
| Robart | RBT130 | "2.25"" Scale X Tread Wheels" | $10.75 | | |
| Robart | RBT131 | "2.50"" Scale X Tread Wheels" | $10.75 | | |
| Robart | RBT132 | "2.75"" Scale X Tread Wheels" | $10.75 | | |
| Robart | RBT145-6 | "6"" Neumatic Retract 80 Deg. Wheels" | $369.50 | | |
| Robart | RBT160LWC | Retract Tail Wheel LH Offset and Air Cylinder | $105.50 | | |
| Robart | RBT311 | "1/8"" Big Bag Hinge Combo" | $15.95 | | |
| Robart | RBT312 | "3/8"" Big Bag Hinge Combo" | $15.95 | | |
| Robart | RBT331 | "3/4"" Large Ball Horn/Clevis" | $4.85 | | |
| Robart | RBT332 | "1"" Large Ball Horn/Clevis" | $4.85 | | |
| Robart | RBT333 | "1 1/4"" Large Ball Horn/Clevis" | $4.85 | | |
| Robart | RBT345 | "Fowler Flap Hinges, 2 Pair" | $69.95 | | |
| Robart | RBT350 | "Gear Door Hinges, Metal" | $7.25 | | |
| Robart | RBT404 | Incidence Meter | $29.95 | | |
| Robart | RBTPT38 | "Paint; Z-Poxy 8 ozs., 5 mins." | $8.75
| | |
| Robart | RBTPT39 | "Paint; Z-Poxy 8 ozs., 30 mins." | $8.75
| | |
| Robart | RBTSBDZ | Retarcts: Main Gear for Ziroli SBD | $395.00
| | |
| Robart | Retracts | Robart Retracts Available-Happy to order if not in stock | CALL
| | |
| WCF | WCF104 | "Wild Cat 1 Gal. 10% Nitro, 18% Oil (80% Synthetic 20% Degummed)" | $14.75
| | |
| WCF | WCF105 | "Wild Cat 1 Gal. 15% Nitro, 16% Oil (80% Synthetic 20% Degummed) " | $16.25
| | |
| WCF | WCF159 | "Wild Cat 1 Gal. 15% Nitro, 18% Oil (80% Synthetic 20% Degummed) " | $16.45
| | |
| Yellow | Yelzero | A6M5 Japaneese Zero 1/5 Scale Delux Kit | $585.00
| | |